View TLSU125_62128.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLSU125,TLSU126
TOSHIBA LED Lamp InGaAP Red Light Emission
TLSU125, TLSU126
Panel Circuit Indicator
* * * * * * InGaAP red LED All plastic mold type TLSU125: Colorless clear lens TLSU126: Milky lusterless lens Suitable for high-brightness and low power consumption. All plastic molded lens, provides an excellent on-off contrast ratio. Applications: Backlight, light for decoration, switches, various indicator, personal equipment Unit in mm
JEDEC EIAJ TOSHIBA
4-4E1A
Maximum Ratings (Ta = 25C)
Product TLSU125 TLSU126 Forward Current IF (mA) 30 30 Reverse Voltage VR (V) 4 4 Power Dissipation PD (mW) 72 72
Weight: 0.14 g
Operating Temperature Topr (C) -30~85 -30~85 Storage Temperature Tstg (C) -40~120 -40~120
1
2002-09-25
TLSU125,TLSU126
Electrical And Optical Characteristics (Ta = 25C)
Product p TLSU125 TLSU126 Unit 636 636 nm Typ. Emission Wavelength 17 17 IF 20 20 mA Min 153 85 mcd Luminous Intensity IV Typ. 300 180 Forward Voltage VF Max 2.4 2.4 V Reverse Current IR Max VR 50 50 A 4 4 V
IF 20 20 mA
Typ. 2.0 2.0
IF 20 20 mA
Precaution
* * * Please be careful of the followings Soldering temperature: 260C max Soldering time: 3 s max
(Soldering portion of lead: Up to 2 mm from the body of the device) If the lead is formed, the lead should be formed up to 5 mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light.
2
2002-09-25
TLSU125,TLSU126
IF - VF
100 50 Ta = 25C 1000 Ta = 25C A : TLSU125 B : TLSU126
IV - IF
(mA)
(mcd)
500 300
Forward current IF
Luminous intensity
IV
20 10
A B
100 50 30
5
2 1 1.6
1.8
2.0
2.2
2.4
2.6
10 1
3
5
10
30
50
100
Forward voltage
VF
(V)
Forward current
IF
(mA)
IV - Tc
10 5 1.0
Relative Luminous Intensity - Wavelength
IF = 20mA
IV
Ta = 25C
Relative luminous intensity
2 1 0.5
Relative luminous intensity
0.8
0.6
0.4
0.2 0.1 -25
0.2
0
25
50
75
100
0 560
580
600
620
640
660
680
Case temperature Tc
(C)
Wavelength
(nm)
Radiation Pattern
40
IF - Ta Ta = 25C
Allowable forward current IF (mA)
30
A: TLSU125 B: TLSU126
20 30 40 50 60 70 80 90 B 10 0 10 A 20
30 40 50 60 70 80
20
10
0
0.2
0.4
0.6
0.8
90 1.0
0 0
20
40
60
80
100
Ambient temperature Ta (C)
3
2002-09-25
TLSU125,TLSU126
RESTRICTIONS ON PRODUCT USE
000707EAC
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice.
4
2002-09-25

▲Up To Search▲

Price & Availability of TLSU125

	To Download TLSU125 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .